This indicates the Memory Recall mode is now engaged. A -MEMORY- notation will appear on the display. H-V icon for the 144 MHz band H-U icon for the 430 MHz band 2. On the front panel press the up or down keys, /, to recall the desired operating band. Recall a memory channel which is stored in the same operating band (In-band Memory Mode) 1. This will also exit you from the Memory Recall mode. Press the front panel up or down keys, /, to select the desired operating band. Rotate the DIAL knob to select the desired memory channel. This indicates you are now in the Group Memory Bank. Press the front panel up or down keys, /, until the GRP notation appears in the upper left of the display. All Memory Channel Recall (Group Memory Mode) 1. Group Memory Mode enables you to recall all the Memory Channels and In-band Memory Mode enables you to recall only the memory channels which are stored within the same operating band. Memory Recall (p 34) The FTM-10R has two methods of recalling memory. Therefore, you do not have to program the repeater shift, or offset. Programming the OffsetĢ The default of the radio is Automatic Repeater Shift (ARS). You will be returned to the memory recall mode. Rotate the DIAL knob to select the desired CTCSS Tone Frequency. Press the front panel key to display the current CTCSS Tone Frequency. Recall the memory channel where you wish to program the CTCSS (PL) frequency.
#Ftb8800 registration key code
FTM-10R can memorize the following items with the frequency at the same time: Memory Group Information Alpha-numeric Memory Channel Tag Repeater Shift (Direction and Shift Frequency) CTCSS/DCS Squelch System and its frequency and code Transmit Output Power Level Scan Mode (Skip Scan or Preferential Scan) Frequency Step Semi-Diplex (Odd) frequency Receiving Mode (AM or FM) Programming a PL for a Repeater 1. The MIN will disappear (since you are operating in the VFO mode). With five (5) seconds of pressing the small on the front panel, press it again, this time briefly, to store the frequency displayed into the memory location. If nothing is done the radio will return to the VFO mode. A MIN notation will appear on the display in the upper left and will blink. Press and hold the small on the front panel for one second.
Rotate the DIAL knob to Menu Item F41 STEP. (See the next section to change the Frequency Step).
Rotate the DIAL knob to the desired frequency. Press the front panel to change the frequency. Press the front panel / keys to the desired band. 1 Easy Programming for the Yaesu FTM-10R Programming a Frequency - Simplex To dial a frequency in 1 MHz steps press and hold down for one second either the up or down arrow key on the front panel.
0 kommentar(er)
